A 外徑 Tubing O.D | B 內徑 Tubing I.D | C 纏繞圈外徑 Coil O.D | D 纏繞圈內徑 Coil I.D |
E 相當大延伸長度 Max Extend Length | F 尾部直管長度 Tail Length(F1F2) | G 螺旋部分長度 Coil part length |
產品訂購編號:
CL-WB-0850-6M-T1T2
CL | W WB | 0850 | 6M | T1 T2 |
PU伸縮管 PU coil tube | 空白 不含接頭 Blank without fittings | 管子尺寸 Tube size | 管子長度 Tube Length | 尾部直管長度 Tail Length |
W 裝接頭 With coupler | ||||
WB 裝接頭+護套 coupler+shield sleeve |
注:護套:一般是橡膠或者尼龍材質,安裝與接頭和管子的連接處用于保護連接處的管子。
Shield sleeve: Material always be rubber or Nylon, set at the joint of couple and tube to protect the tube at the joint.
眾多的顏色選擇 The Wide Selection Colors
以上為常規顏色,其他顏色可以根據樣品或者PANPONE色卡定制。
Above are general colors, other color can book according to your sample or PANPONE color No.
特性: Feature:
* 良好的螺旋回復記憶性。 Improved coil memory.
* 彈力好,松垂程度少。 Retract faster and better minimal sag.
* 不易繞曲。 Resistant to kinks.
* 耐磨損。 Abrasion resistance.
* 使用壽命長,耐壓。 Longer service life,resistant to pressure.
* 工作長度能達到總長的60%。 Working length is approximately 60% of the coil’s length.
提示 HINTS:
1,壁厚和承載物的重力都會影響彈簧管的彈力回復。
A coil’s retract ability is a affected by coil’s wall thickness and the mass weight.
2,纏繞圈直徑小,彈簧管會有良好的伸縮性。
Excellent retract ability is affected by the small coil diameter.
3,纏繞圈直徑大,彈簧管易于伸展和使用。
The big coil diameter could be easy to stretch and used comfortably.
4,如需要更好更強的彈性,可以將彈簧管的其中一尾端從中間穿過彈簧管,從另一端拉出。(它的工作長度也會相應減短)
If you want a stronger elasticity,let one tail go through the middle of coil,pull it out at another end of coil.(The coil’s working length could be shorter.)